Machinist Relay | Linear Stage Compliant Structures


Comments • 550

  • RocketSurgeon
    RocketSurgeon  4 months back

    I thought a Machinist Relay is a track and field event where the first machinist gets the baton to some state of completeness, doesn't tell the next guy what needs to be done, pulls a random fuse, hides the keys to the shop, and then hands the baton to the next guy. First team to pass the finish line with a fully machined baton wins.

    • Logical Conservative
      Logical Conservative  4 months back

      @Lakshmanan L M me too at first!

    • Lakshmanan L M
      Lakshmanan L M  4 months back

      @Logical Conservative I tot I read wench...

    • Brennan Lukas
      Brennan Lukas  4 months back

      now that would be an Olympic event worth watchin

    • 3dsman
      3dsman  4 months back

      @AvE I heard the cops are looking out for a guy who's been breaking into local craft shops and dipping his testicles in the glitter. Yeah, it's pretty nuts...

  • Noah Rotz
    Noah Rotz  3 days back

    Does anyone have any clue what that box knife he has is. I would love to have one like that.

    • Marty Smith
      Marty Smith  2 months back

      Use hard wax, not foam. Melt it in, machine, usually you can just dig it out.

      • UziFoo
        UziFoo  2 months back

        Doesn't all that milk get sour?

        • Malter Dwight
          Malter Dwight  2 months back

          The endings do your videos are abrupt sometimes. Guess that's just how the pickle squirts

          • Whatyoudo
            Whatyoudo  3 months back

            jesus, I just figured you were mentally deficient till I saw the Zortrax, let the Polish jokes begin, you know they invented the first real jet right? the Jetski! ;]

            • hold 'er Newt, shes rearin' ?

              Now every Southpark episode i watch henceforth will make A LOT more sense!

              • dandexinventor
                dandexinventor  3 months back

                The DOW foam out of the can is hard to control flow, but the DOW contractor gun with the larger thread-on cans works great, can reduce flow all the way to zero with a knob on the back of the gun. I've learned the hard way to keep it clean though and leave the DOW cleaner (comes in thread-on cans to run through gun) in the gun so foam does not dry inside, but otherwise, this is far more efficient than the single use expanding foam cans. Also, the black plastic tips are a must in my experience as they allow deeper access to small gaps and make cleaning the gun tip easier.

                • William Morris
                  William Morris  3 months back

                  pour wax in there?

                  • Scott woodrich
                    Scott woodrich  3 months back

                    You are the first person needed in a zombie apocolypse!!!! Take it for what its worth...

                    • Ben Siekierski
                      Ben Siekierski  3 months back

                      isn't this kinda how the puzzle box from hell raiser was made?

                      • Lonewolf rider
                        Lonewolf rider  3 months back

                        How's theclaws welding progression is the house still up?

                        • Christopher C.
                          Christopher C.  3 months back

                          Bit late finding this Gem. seems to me like Chickadee Engineerding ought to be involved on these complicrumpted attempts if you want a good result .

                          • MrAkurvaeletbe
                            MrAkurvaeletbe  3 months back

                            So you gave up or what? I want to see how this relay works

                            • Tomas Wolsink
                              Tomas Wolsink  3 months back

                              Watching you're videos intoxicated on some good beers best thing around haha good weekend. Groeten uit Nederland

                              • john Taylor
                                john Taylor  4 months back

                                Ooof get a folding Stanley knife. The only thing I understood here was the cardboard box, what's the grooved up metal thing you're making?

                                • Jacob Wells
                                  Jacob Wells  3 months back

                                  I love those Olfa cutters, carried one nearly every day when I was stocking shelves. Best knives for opening boxes ever.

                              • etyrnal
                                etyrnal  4 months back

                                I think you could have also put some harmonic dampener on the opposite side of the cuts to prevent buildup of harmonic resonance which probably contributed to the breakage.

                                • James Willich
                                  James Willich  4 months back

                                  That foam is pretty garbage. A 2-part epoxy poured in the channel would hold significantly better.

                                  • jasondemate
                                    jasondemate  4 months back

                                    Use some of those sweet patreon dollars and buy some 136°F Eutectic Fusible Alloy. Fun to play with and great for temporarily fusing parts for machining. Cheap too!

                                    • Biohazarus
                                      Biohazarus  4 months back

                                      Could of put wax in it, but cleaver thinking!

                                      • vaderdudenator1
                                        vaderdudenator1  4 months back

                                        Wait, so who’s Quinn Ducky?

                                        • Bence Sárosi
                                          Bence Sárosi  4 months back

                                          @vaderdudenator1 Cool stuff, definitely check her out.

                                        • vaderdudenator1
                                          vaderdudenator1  4 months back

                                          Thanks! I think this is the first I’ve heard of her so I couldn’t get the spelling well enough to find the channel. It looks pretty good though

                                        • Bence Sárosi
                                          Bence Sárosi  4 months back

                                          Quinn Dunki, the owner of the channel BlondiHacks.

                                      • the4thj
                                        the4thj  4 months back

                                        GOD STOP WITH THE WELDING GO DRINK A BEER! TAKE OFF!

                                        • Michael Ravetti
                                          Michael Ravetti  4 months back

                                          A real part that gets paid engineering! Cooler than a frozen potato but not by much

                                          • Jacob May
                                            Jacob May  4 months back

                                            What's a guy gotta do to hear some classical music??

                                          • Mack Dlite
                                            Mack Dlite  4 months back

                                            Is that yellow Pisten Bully thing actually a part or just a sticker on something else?

                                            • ricky Bobby
                                              ricky Bobby  4 months back

                                              How many subs does this man have?

                                              • Shayn Webb
                                                Shayn Webb  4 months back

                                                Can you please pull apart a "Sovamedic Harmonie" machine on David Icke's website? That would be an interesting video in of itself! Thanks for the consideration!

                                                • Moshe Galimidi
                                                  Moshe Galimidi  4 months back

                                                  AVE ! i got a gift for you how can i contact you?

                                                  • turbo2ltr
                                                    turbo2ltr  4 months back

                                                    Hope your coolant system has a good filter. You might want to change it at this point..

                                                    • Joe Waun
                                                      Joe Waun  4 months back

                                                      My new lathe is not low grade nor Chineseum. It's an OLD school craftsman metal lathe. I think it's technically bench top but it's solid

                                                      • Hard Knocks Forge
                                                        Hard Knocks Forge  4 months back

                                                        All my favorite ladies give massagies

                                                        • Mike Smith
                                                          Mike Smith  4 months back

                                                          It sounds like he is speaking English but I don't understand any of it

                                                          • WC_2 Electric_Boogaloo
                                                            WC_2 Electric_Boogaloo  4 months back

                                                            AvE, free tool.
                                                            I have a Cryobi impact that is beginning to let the literal smoke out. I intend in replacing it with a milfuckee, so I won't be trying to warrenty it. My co-worker had one that caught fire while working, and id rather have it disposed of in either a safe manor or in a spectacular manor on camera.

                                                            Id be happy to sent it to you so that you can fix it to death properly, in a vidjyo, for the interested public.

                                                            • billphillipstube
                                                              billphillipstube  4 months back

                                                              Bet that last run, when it all comes together, feels good.

                                                              • m 88
                                                                m 88  4 months back


                                                                • James Klima
                                                                  James Klima  4 months back

                                                                  Hi AvE, I came across a video here about the Searl Effect Zero Point Generator. I would value your opinion and or discussion on if you think this is this a viable energy source. It's certainly not the usual half baked doesn't resemble reality in the slightest quackery. There is some very real physics to the claim. Please take some time to veiw it. You can reach me at jimklima at rocketmail dot com. Keep up the good work on the videos. Amusing as they are they have proved time and again to be very helpful.

                                                                  • bhartwigutube
                                                                    bhartwigutube  4 months back

                                                                    Glad someone knows the words... maybe you should tell Justin how the anthem goes....

                                                                    • Cody Tamling
                                                                      Cody Tamling  4 months back

                                                                      I'd be a liar if I said I didn't click the video because I saw a PistenBully sticker, drive around in one almost every day, but not in grain! Another awesome video man!

                                                                      • AvE
                                                                        AvE   4 months back

                                                                        In grain?! mind blown. VIDS PLEASE! Please!

                                                                    • Harry Graham
                                                                      Harry Graham  4 months back

                                                                      I have this old Weber Kettle Grill.. Can you help me build it, better, stronger, faster?

                                                                      • CGT80
                                                                        CGT80  4 months back

                                                                        5:27 I thought you were just doing a bad job of frying up some bacon while in the shop. Hope it didn't look like bird crap!

                                                                        • Irish Viking
                                                                          Irish Viking  4 months back

                                                                          Not sure you have enough coolant there.

                                                                          • Carl Zarelli
                                                                            Carl Zarelli  4 months back

                                                                            Ave could you do a review on the Harbor Freight welder that purports to do TIG, MIG, And stick welding ? Thank you.

                                                                            • priit mölder
                                                                              priit mölder  4 months back

                                                                              Wonder where it goes from here...

                                                                              • TheManLab7
                                                                                TheManLab7  4 months back

                                                                                I'm no machinest but wouldn't of it been better to deck n get everything to size first before cutting the intricate details?

                                                                                • Zedex 12
                                                                                  Zedex 12  4 months back

                                                                                  How you gonna hold them from wangling around? That floor to be decked off connects everything together so that the force of cutting doesn't break the part. (Of course introducing it's own challenges to overcome)

                                                                              • Robert Szasz
                                                                                Robert Szasz  4 months back

                                                                                Foam instead of just supergluing it to the plate and then adding some heat to get it loose?

                                                                                • Jimmy Hartford
                                                                                  Jimmy Hartford  4 months back

                                                                                  I love stickers, all over the shop in odd places.

                                                                                  • TheYourfaceable
                                                                                    TheYourfaceable  4 months back

                                                                                    I prefer to keep my flexture precise down to 1 thou

                                                                                    Never know when the ladies are gonna bust out the microscope

                                                                                    • John McPherson
                                                                                      John McPherson  4 months back

                                                                                      I really enjoy the ave vijeos, and youtube had recommended i watch abom and some guy named old Tony.

                                                                                      It has been widely publicized that youtube radicalizes communities.

                                                                                      Is this a community of radical machinists?
                                                                                      I would enjoy a march in support of squirrel yakisoba and fancy noodle machines and against mediocre power tools. What do you suppose radical machinists look like?